My Cart
0 0 item(s) - $0.00
Packages May Vary

Super Iron Out Rust Stain Remover - 28 oz (Pack of 6)

Super Iron Out Rust Stain Remover - 28 oz (Pack of 6)

Reference # C076168000046

$40.95 Reg.$49.14 each
You Save: 17%

Free Shipping

Availability: Out of stock

$40.95 Reg.$49.14 each
You Save: 17%


Best on rust. Toilets, white laundry, bath, appliances, water softener cleaner and more. For helpful tips, money saving coupons and information on the family of Super Iron Out products visit: Performance Guaranteed: If not satisfied with product performance mail register receipt along with UPC to Summit brands for a full refund. 1-888-476-6688 Mon. - Fri. 8-5 EST. Product settles; sold by weight, not volume. Contains no phosphates. Safe for septic tanks. Made in the USA.
Brand Evolution Salt
Free of N/A
Weight 12.36 lbs
Count 28 oz (1 lb 12 oz) 793 g x 6
Servings N/A
SanaCause Points 20
For Use (Read Entire Label Before Using): Always pre-test in an inconspicuous area. For stubborn stains, increase dosage and/or contact time. Dishes, Glass, Plasticware - 1. Dissolve 1/3 cup in 1 gal. of warm water. 2. Soak articles 5 min., or until stains are gone. 3. Rinse thoroughly. Repeat as needed. Dishwasher/Washing Machine - 1. Add 1/2 cup to empty machine. 2. Run machine through normal cycle using water only. Repeat as needed. Note: Do not open machine mid-cycle. Exterior Surfaces - 1. Mix 1 cup into 1 gal. warm water. 2. Wet surface with clear water. 3. Apply with brush or sponge. 4. Keep saturated until stains are gone. Rinse. Note: Avoid contact with vegetation. Tubs, Sinks, Tile - 1. Wet area to be cleaned. 2. Apply powder to damp sponge or cloth. 3. Rub lightly until stains are gone. Rinse. Note: Not recommended for older, worn or chipped porcelain cast iron fixtures. Toilet Bowl & Water Tank - Remove cleaners or deodorant from bowl or tank. Flush. Bowl: 1. Add 1/2 cup to water in bowl. 2. Scrub stained area with brush. 3. Let stand until stains are gone. Flush. Tank: 1. Raise water level above stain line if possible. 2. Add 1/2 cup. 3. Let stand overnight or until stains are gone. White Laundry & Fabrics/Laundry with Color or Embroidery - Note: Do not use with bleach or peroxide. Whites - 1. Add 1/2 cup to warm water as washer is filling. 2. Add clothes and let soak for 5 minutes, if possible, by stopping machine. 3. Add detergent and resume wash/rinse cycle. 4. Dry as usual. Colors - Test all colors before using. Use only on colorfast dyes. Note: Wash each item separately using the white clothes instructions. Caution: Product may irreparably damage colors and embroidered logos. Water Softener - All softeners on iron bearing water require Super Iron Out as preventative maintenance and to eliminate iron buildup. First Application - 1. Dissolve 1 cup in 1/2 gal. cold water. 2. Pour directly into brine well (for softeners with no brine well, pour directly into salt tank when salt level is low). 3. Manually regenerate softener. Repeat for heavily fouled unit. Regular Use - 1. Add 1/4 cup per 40 lbs. of salt. 2. Layer for continuous treatment. Cabinet Models - Use for periodic cleaning only. Follow first application instructions above. Repeat regularly. Note: If taste or odor is detected in tap water, manually regenerate softener, then run cold water until odor is gone. Storage/Disposal: Store in original container and reseal after each use.

Write Your Own Review

  1 star 2 stars 3 stars 4 stars 5 stars

Be part of our community